Carving, an extraordinary symbiosis between the natural structure of wood and a variety on graphic design. The innovative Carving technology enables us to engrave classic, retro-modern and contemporary designs into naturally oiled wood surfaces. Directness, clarity and structure - these values again further developed and simplified, that is the Carving Check I. Its subtle charm ensures a highly recognisable value, but without intruding. Through its striking design Carving Check I is especially suited for boutiques and showrooms. It is also ideal for health and spa areas due to its non-slip surface. The graphic design runs along the floor plank and is repeated several times lengthwise.
Oak wood with consistent colouring resulting from special heat treatment (without chemical additives). This treatment is intensifying the natural color play of the wood and leads to a variation in brown tones. Oak plank in 3-layer construction with small bevel on long side and approx. 4 mm top layer, with approx. 4 mm backing in the same wood and middle layer conifer. Tongue and groove on all sides for easy installation. Cracks, knotholes and large knots are emphasized with black putty. Variations in colour and sapwood at the edges possible. Small open cracks and unsealed spots of a few millimetres are permitted.