Carving, an extraordinary symbiosis between the natural structure of wood and a variety on graphic design. The innovative Carving technology enables us to engrave classic, retro-modern and contemporary designs into naturally oiled wood surfaces. Inspired by the French herringbone look, the Carving Chevron I was created. Both architects and installers alike are convinced by the Chevron appearance and yet still with a fast installation. The graphic design is divided across 2 planks and is repeated several times lengthwise.
Oak wood with consistent colouring resulting from special heat treatment (without chemical additives). Oak plank in 3-layer construction with small bevel on long side and approx. 4 mm top layer, with approx. 4 mm backing in the same wood and middle layer conifer. Tongue and groove on all sides for easy installation. For the main part the planks have healthy knots, isolated repairs up to 25 mm diameter and tension cracks up to max. 30 cm are possible. Small open cracks and unsealed spots of a few millimetres are permitted.