Carving is an extraordinary symbiosis between the natural structure of wood and a variety on graphic design. The innovative Carving technology enables us to engrave classic, retro-modern and contemporary designs into naturally oiled wood surfaces. Carving Retro I reflects an attitude to life that has influenced a whole generation. mafi has, with the help of special details, taken the ideology of that time and adapted it into todays Zeitgeist breathing new life into it. Carving Retro I requires a second glance to recognise the advantages of combining a high quality wood floor with the soothing ambience of textiles. Thanks to its hard wearing surface and its distinctive design, this floor is especially ideal for use in the Gastronomy sector.
Beech wood with consistent colour resulting from heat treatment (without chemical additives). Beech plank in 3-layer construction, bevelled on the long side and with approx. 4 mm top layer, with approx. 4 mm backing in the same wood and middle layer conifer. Tongue and groove on all sides for easy installation. The graphic design is split across 2 floor planks and is repeated several times lengthwise. The planks are numbered on the head end of the groove (1/2, 2/2). In order to avoid joins in the same position, there are indicators where to cut and these are marked with CUT along the groove.